-
Nkọwa dị mkpirikpi nke 2 na-emechi Loop Stepper Drive S Series
Usoro TS bụ ụdị nkwalite nke onye ọkwọ ụgbọ ala mepere emepe nke Rtelligent bidoro, yana echiche imepụta ngwaahịa sitere na mkpokọta ahụmịhe anyị.
n'ọhịa nke stepper mbanye na afọ. Site na iji ihe owuwu na algọridim ọhụrụ, ọgbọ ọhụrụ nke onye ọkwọ ụgbọ ala stepper na-ebelata njupụta resonance dị ala nke moto, nwere ikike mgbochi nnyonye anya siri ike, ebe ọ na-akwado nchọpụta ntụgharị na-abụghị inductive, oti mkpu na ọrụ ndị ọzọ, na-akwado a. ụdị iwu pulse dị iche iche, ọtụtụ ntọala itinye.
-
Usoro 2 Mepee Loop Stepper Drive S Series
Usoro RS bụ ụdị nkwalite nke onye ọkwọ ụgbọ ala mepere emepe nke Rtelligent bidoro, yana echiche imepụta ngwaahịa sitere na mkpokọta ahụmịhe anyị na ngalaba stepper mbanye kemgbe ọtụtụ afọ. Site na iji ihe owuwu na algọridim ọhụrụ, ọgbọ ọhụrụ nke onye ọkwọ ụgbọ ala stepper na-ebelata njupụta resonance dị ala nke moto, nwere ikike mgbochi nnyonye anya siri ike, ebe ọ na-akwado nchọpụta ntụgharị na-abụghị inductive, oti mkpu na ọrụ ndị ọzọ, na-akwado a. ụdị iwu pulse dị iche iche, ọtụtụ ntọala itinye.
-
Ọkara PLC RM500 Series
Ihe njikwa mgbagha nwere ike ime usoro RM, njikwa mgbagha na ọrụ njikwa ngagharị. Site na mpaghara mmemme CODESYS 3.5 SP19, enwere ike itinye usoro a ma jiri ya mee ihe site na ọrụ FB/FC. Enwere ike nweta nkwurịta okwu netwọk nke ọtụtụ oyi akwa site na RS485, Ethernet, EtherCAT na CANOpen interfaces. Ahụ PLC na-ejikọta ntinye dijitalụ na ọrụ mmepụta dijitalụ, ma na-akwado mgbasawanye nke-8 Reiter IO modul.
· Voltaji ntinye ike: DC24V
Ọnụọgụ ihe ntinye: 16 ihe ntinye bipolar
· Ọnọdụ iche: fotoelectric njikọ
Oke nzacha ntinye ntinye: 1ms ~ 1000ms
· Ihe mmepụta ihe dijitalụ: 16 NPN mmepụta
-
Njikwa Pulse 2 Usoro Mechie Loop Stepper Drive T60Plus
T60PLUS mechiri emechi loop stepper mbanye, yana ntinye akara Z na ọrụ mmepụta. Ọ na-ejikọta ọdụ ụgbọ mmiri miniUSB maka nbibi dị mfe nke paramita ndị metụtara ya.
T60PLUS dakọtara mechiri emechi loop stepper moto nwere akara Z n'okpuru 60mm
• Ụdị usu: PUL&DIR/CW&CCW
• Ọkwa mgbaàmà: 5V/24V
• l voltaji ike: 18-48VDC, na 36 ma ọ bụ 48V kwadoro.
• Ngwa ndị a na-ahụkarị: igwe na-anya ụgbọ ala, ihe na-ekesa servo, igwe na-ekesa waya, igwe na-ede aha, ihe nchọpụta ahụike,
• akụrụngwa mgbakọ eletrọnịkị wdg.
-
Akwụkwọ ntuziaka onye ọrụ DRV Series EtherCAT Fieldbus
servo dị ala bụ moto servo emebere ka ọ dabara maka ngwa inye ọkụ ọkụ DC dị ala. DRV usoro obere voltaji servo usoro na-akwado CANopen, EtherCAT, 485 atọ nkwurịta okwu ụdịdị njikwa, netwọk njikọ kwere omume. Usoro DRV draịva servo dị ala nwere ike hazie nzaghachi ọnọdụ koodu iji nweta njikwa ugbu a na njikwa ọnọdụ karịa.
• Oke ike ruru 1.5kw
• Ugboro nzaghachi ọsọ dị elu, dị mkpụmkpụ
• oge idowe
• Soro ọkọlọtọ CiA402
• Nkwado CSP/CSV/CST/PP/PV/PT/HM mode
• Site na mmepụta breeki
-
Usoro 3 Mepee loop Stepper C Series
3R110PLUS dijitalụ 3-phase stepper mbanye gbadoro ụkwụ na algọridim demodulation nkeji atọ nwere ikike. na arụnyere n'ime
teknụzụ micro-stepping, nke na-egosipụta resonance dị ala, obere mkpọda ụda na mpụta oke ike. Ọ nwere ike n'ụzọ zuru ezu na-egwu arụmọrụ nke atọ-adọ stepper Motors.
Ụdị 3R110PLUS V3.0 gbakwunyere ọrụ parampat moto dabara na DIP, nwere ike ịnya moto stepper abụọ nke 86/110.
• Ụdị usu: PUL & DIR
• Ọkwa mgbaàmà: 3.3 ~ 24V dakọtara; nguzogide usoro adịghị mkpa maka ngwa nke PLC.
• voltaji ike: 110 ~ 230V AC; 220V AC tụrụ aro, yana arụmọrụ dị elu dị elu.
• Ngwa a na-ahụkarị: igwe ihe osise, igwe na-ede aha, igwe na-egbutu, onye na-ese ihe, laser, akụrụngwa mgbakọ akpaka, wdg.
-
Mechie Loop Fieldbus Stepper Drive NT60
485 fieldbus stepper mbanye NT60 dabeere na netwọk RS-485 iji na-agba ọsọ Modbus RTU protocol. Njikwa ngagharị nwere ọgụgụ isi
arụ ọrụ jikọtara ya, yana njikwa IO dị na mpụga, ọ nwere ike mezue ọrụ dịka ọnọdụ edobere / ọsọ ọsọ / ọtụtụ
ọnọdụ / auto-homing
Egwuregwu NT60 mepere akaghị ma ọ bụ mechiri emechi stepper moto n'okpuru 60mm
• Ọnọdụ njikwa: ogologo kwụ ọtọ / ọsọ ọsọ / homing / ọtụtụ ọsọ / ọtụtụ ọnọdụ
• Akụrụngwa debugging: RTConfigurator (njikwa RS485 nwere ọtụtụ)
• Voltaji ike: 24-50V DC
• Ngwa a na-ahụkarị: otu axis eletriki cylinder, eriri mgbakọ, tebụl njikọ, ikpo okwu n'ọtụtụ axis, wdg
-
Ọgụgụ isi 2 Axis Stepper moto Drive R42X2
A na-achọkarị akụrụngwa akpaaka nke ọtụtụ axis iji belata ohere ma chekwaa ọnụ ahịa ya.R42X2 bụ draịva pụrụ iche nke abụọ axis nke Rtelligent mepụtara n'ahịa ụlọ.
R42X2 nwere ike ịnya ụgbọ ala abụọ 2-phase stepper n'onwe ya ruo nha etiti 42mm. A ga-edozirịrị obere nzọụkwụ nke axis abụọ na nke ugbu a ka ọ bụrụ otu.
• Ọnọdụ njikwa peed: mgbama ngbanwe ENA na-ejikwa mmalite-nkwụsị, na potentiometer na-achịkwa ọsọ.
• Ọkwa mgbaàmà: Ejikọrọ akara IO na 24V na mpụga
• Ike ọkọnọ: 18-50VDC
• Ngwa ndị a na-ahụkarị: akụrụngwa ebufe, ebuga nyocha, ihe na-ebu PCB
-
Ọgụgụ isi 2 Axis Stepper Drive R60X2
A na-achọkarị akụrụngwa akpaaka ọtụtụ axis iji belata ohere ma chekwaa ọnụ ahịa ya. R60X2 bụ draịva pụrụ iche nwere axis abụọ nke Rtelligent mepụtara n'ahịa ụlọ.
R60X2 nwere ike ịnya ụgbọ ala abụọ 2-phase stepper nke nwere onwe ya ruo nha etiti 60mm. Enwere ike ịtọ obere nzọụkwụ abụọ axis na nke ugbu a iche iche.
• Ụdị usu: PUL&DIR
• Ọkwa mgbaàmà: 24V ndabara, R60X2-5V chọrọ maka 5V.
Ngwa a na-ahụkarị: ihe na-ekesa, igwe na-ere ere, akụrụngwa nnwale ọtụtụ axis.
-
3 Axis Digital Stepper mbanye R60X3
Ngwa ikpo okwu atọ-axis na-enwekarị mkpa iji belata ohere ma chekwaa ego. R60X3/3R60X3 bụ mbụ atọ-axis pụrụ iche mbanye nke Rtelligent mepụtara na ụlọ ahịa.
R60X3 / 3R60X3 nwere ike ịnya ụgbọ ala atọ 2-phase / 3-phase stepper motors ruo nha etiti 60mm. Ihe nrịbama nke axis atọ na nke ugbu a bụ nke a na-edozi onwe ya.
• Ụdị usu: PUL&DIR
• Ọkwa mgbaàmà: 3.3-24V dakọtara; nguzogide serial achọghị maka ngwa nke PLC.
Ngwa ahụkarị: ihe na-ekesa, ire ere
• igwe, ihe osise, multi-axis ule akụrụngwa.
-
IO Speed Control Switch Stepper Drive Series
IO usoro mgba ọkụ stepper mbanye, nwere ụdị S-ụdị osooso na ụgbọ oloko mbelata, naanị chọrọ mgbanwe iji kpalite
moto mmalite na kwụsị. E jiri ya tụnyere moto na-achịkwa ọsọ ọsọ, usoro IO nke ịgbanye stepper mbanye nwere njiri mara mmalite na nkwụsị kwụsiri ike, ọsọ otu, nke nwere ike ime ka nrụpụta eletrik dị mfe nke ndị injinia.
• ọnọdụ ontrol: IN1.IN2
• Ntọala ọsọ: DIP SW5-SW8
• Ọkwa mgbaàmà: 3.3-24V dakọtara
• Ngwa a na-ahụkarị: akụrụngwa mbufe, ihe nlegharị anya, ihe na-ebu PCB
-
Digital Stepper moto ọkwọ ụgbọ ala R86mini
Tụnyere R86, R86mini dijitalụ abụọ-phase stepper mbanye na-agbakwụnye mmepụta mkpu na ọdụ ụgbọ mmiri debugging USB. ntakiri
size, mfe iji.
A na-eji R86mini akwọ ụgbọ ala stepper moto abụọ n'okpuru 86mm
• Ụdị usu: PUL & DIR
• Ọkwa mgbaàmà: 3.3 ~ 24V dakọtara; Achọghị nguzogide usoro maka ngwa PLC.
• voltaji ike: 24 ~ 100V DC ma ọ bụ 18 ~ 80V AC; 60V AC kwadoro.
• Ngwa a na-ahụkarị: igwe ihe osise, igwe na-ede aha, igwe na-egbutu, onye na-akpa nkata, laser, akụrụngwa mgbakọ akpaka,
• wdg.
