-
Ngbanwe Stepper Driver Series R42IOS/R60IOS/R86IOS
Na-egosipụta arụnyere n'ime yaS-curve acceleration/deceleration pulse generation, ọkwọ ụgbọ ala a chọrọ naanị mfeMgba ọkụ/gbanyụọ mgba ọkụiji chịkwaa mmalite/nkwụsị moto. Tụnyere moto na-achịkwa ọsọ ọsọ, IO Series na-enye:
✓Osooso/breeki dị nro(mbelata ujo n'ibu)
✓Njikwa ọsọ na-agbanwe agbanwe karịa(na-ewepụ nkwụsị nzọụkwụ na obere ọsọ)
✓Nhazi ọkụ eletrik dị mfemaka ndị injinia -
Oge Omuma 2 Mepee Loop Stepper Drive R60
Dabere na ikpo okwu DSP 32-bit ọhụrụ yana ịnakwere teknụzụ micro-stepping na algọridim njikwa PID ugbu a.
imewe, Rtelligent R usoro stepper mbanye karịrị arụmọrụ nke draịva analọgụ nkịtị nke ọma.
R60 dijitalụ 2-phase stepper mbanye dabere na ikpo okwu 32-bit DSP, yana teknụzụ micro-stepping arụnyere na ngbanwe akpaaka. Ụgbọala ahụ na-egosi mkpọtụ dị ala, obere ịma jijiji, obere ọkụ na mmepụta ike dị elu dị elu.
A na-eji ya akwọ ụgbọ ala stepper moto abụọ n'okpuru 60mm
• Ụdị usu: PUL&DIR
• Ọkwa mgbaàmà: 3.3 ~ 24V dakọtara; Achọghị nguzogide usoro maka ngwa PLC.
• voltaji ike: 18-50V DC ọkọnọ; 24 ma ọ bụ 36V kwadoro.
• Ngwa a na-ahụkarị: igwe ihe osise, igwe na-ede aha, igwe na-egbutu, onye na-ese ihe, laser, akụrụngwa mgbakọ akpaka, wdg.
-
Usoro 2 Mepee Loop Stepper Drive R42
Dabere na ikpo okwu DSP 32-bit ọhụrụ yana ịnakwere teknụzụ micro-stepping na PID ugbu a njikwa algọridim imewe, Rtelligent R usoro stepper mbanye karịrị arụmọrụ nke draịva analọg nkịtị nke ọma. R42 dijitalụ 2-phase stepper mbanye dabere na ikpo okwu 32-bit DSP, yana teknụzụ micro-stepping arụnyere na ntinye akpaaka. Ụgbọala ahụ nwere obere mkpọtụ, obere ịma jijiji na obere kpo oku. • Ụdị usu: PUL&DIR • Ọkwa mgbaàmà: 3.3 ~ 24V dakọtara; Achọghị nguzogide usoro maka ngwa PLC. • voltaji ike: 18-48V DC ọkọnọ; 24 ma ọ bụ 36V kwadoro. • Ngwa ndị a na-ahụkarị: igwe nrịbama, igwe na-ere ere, laser, mbipụta 3D, nhazi ihe ngosi, akụrụngwa mgbakọ akpaka, • wdg.
-
IO Speed Control Switch Stepper Drive R60-IO
IO usoro mgba ọkụ stepper mbanye, nwere ụdị S-ụdị osooso na ụgbọ oloko mbelata, naanị chọrọ mgbanwe iji kpalite
moto mmalite na kwụsị. E jiri ya tụnyere moto na-achịkwa ọsọ ọsọ, usoro IO nke ịgbanye stepper mbanye nwere njiri mara mmalite na nkwụsị kwụsiri ike, ọsọ otu, nke nwere ike ime ka nrụpụta eletrik dị mfe nke ndị injinia.
• ọnọdụ ontrol: IN1.IN2
• Ntọala ọsọ: DIP SW5-SW8
• Ọkwa mgbaàmà: 3.3-24V dakọtara
• Ngwa a na-ahụkarị: akụrụngwa mbufe, ihe nlegharị anya, ihe na-ebu PCB
-
Usoro 3 Mepee Loop Stepper Drive 3R130
3R130 dijitalụ 3-phase stepper mbanye dabere na patent demodulation algọridim nke nwere obere arụnyere n'ime ya.
teknụzụ nzọpụ ụkwụ, na-egosipụta resonance dị ala, obere torque ripple. Ọ nwere ike na-arụ ọrụ nke akụkụ atọ nke ọma
stepper moto.
A na-eji 3R130 na-anya ụgbọ ala nzọụkwụ atọ n'okpuru 130mm.
• Ụdị usu: PUL & DIR
• Ọkwa mgbaàmà: 3.3 ~ 24V dakọtara; nguzogide usoro adịghị mkpa maka ngwa nke PLC.
• voltaji ike: 110 ~ 230V AC;
• Ngwa ndị a na-ahụkarị: igwe ihe osise, igwe na-egbutu, ihe eji ebi akwụkwọ na ihuenyo, igwe CNC, mgbakọ akpaka
• akụrụngwa, wdg.
-
Usoro 3 Mepee Loop Stepper Drive 3R60
3R60 dijitalụ 3-phase stepper mbanye dabere na patent demodulation algọridim nke nwere obere arụnyere n'ime ya.
teknụzụ nzọpụ ụkwụ, na-egosipụta resonance dị ala, obere torque ripple. Ọ nwere ike na-arụ ọrụ nke akụkụ atọ nke ọma
stepper moto.
A na-eji 3R60 na-anya ụgbọ ala nzọụkwụ atọ n'okpuru 60mm.
• Ụdị usu: PUL & DIR
• Ọkwa mgbaàmà: 3.3 ~ 24V dakọtara; Achọghị nguzogide usoro maka ngwa PLC.
• voltaji ike: 18-50V DC; 36 ma ọ bụ 48V kwadoro.
• Ngwa a na-ahụkarị: onye na-ekesa, igwe na-ere ere, igwe ihe osise, igwe ịcha ọkụ laser, ngwa nbipute 3D, wdg.
-
Nkeji 3 Mepee Loop Stepper Drive 3R110PLUS
3R110PLUS dijitalụ 3-phase stepper mbanye gbadoro ụkwụ na algọridim demodulation nkeji atọ nwere ikike. na arụnyere n'ime
teknụzụ micro-stepping, nke na-egosipụta resonance dị ala, obere mkpọda ụda na mpụta oke ike. Ọ nwere ike n'ụzọ zuru ezu na-egwu arụmọrụ nke atọ-adọ stepper Motors.
Ụdị 3R110PLUS V3.0 gbakwunyere ọrụ parampat moto dabara na DIP, nwere ike ịnya moto stepper abụọ nke 86/110.
• Ụdị usu: PUL & DIR
• Ọkwa mgbaàmà: 3.3 ~ 24V dakọtara; nguzogide usoro adịghị mkpa maka ngwa nke PLC.
• voltaji ike: 110 ~ 230V AC; 220V AC tụrụ aro, yana arụmọrụ dị elu dị elu.
• Ngwa a na-ahụkarị: igwe ihe osise, igwe na-ede aha, igwe na-egbutu, onye na-ese ihe, laser, akụrụngwa mgbakọ akpaka, wdg.
-
Usoro 5 Mepee Loop Stepper Drive 5R42
Tụnyere moto stepper nke nwere akụkụ abụọ nkịtị, nke ise
stepper moto nwere obere nzọụkwụ n'akuku. N'ihe banyere otu rotor
Ọdịdị, usoro nke ise nke stator nwere uru pụrụ iche
maka ịrụ ọrụ nke sistem. . Mbanye stepper nke nwere agba ise, nke Rtelligent mepụtara, bụ
dakọtara na moto njikọ pentagonal ọhụrụ ma nwee
ezigbo arụmọrụ.
5R42 dijitalụ draịva nzọụkwụ ise na-adabere na TI 32-bit DSP n'elu ikpo okwu ma jikọta ya na obere nzọụkwụ.
teknụzụ na usoro demodulation algorithm nke nwere ikike. Na atụmatụ nke obere resonance na ala
ọsọ, obere torque ripple na nkenke dị elu, ọ na-enye ohere nke stepper moto nke ise na-enye ọrụ zuru oke.
uru.
• Ụdị usu: PUL&DIR ndabara
• Ọkwa mgbaàmà: 5V, ngwa PLC chọrọ eriri 2K resistor
• Ike ọkọnọ: 24-36VDC
• Ngwa a na-ahụkarị: ogwe aka igwe, igwe na-apụ apụ ọkụ eletrik, anwụ bonder, igwe ịcha ọkụ laser, akụrụngwa semiconductor, wdg.
-
Usoro 2 Mepee Loop Stepper Drive R60S Series
Usoro RS bụ ụdị nkwalite nke onye ọkwọ ụgbọ ala mepere emepe nke Rtelligent bidoro, yana echiche imepụta ngwaahịa sitere na mkpokọta ahụmịhe anyị na ngalaba stepper mbanye kemgbe ọtụtụ afọ. Site na iji ihe owuwu ọhụrụ na algọridim, ọgbọ ọhụrụ nke stepper ọkwọ ụgbọ ala na-ebelata njupụta resonance dị ala nke moto ahụ, nwere ikike mgbochi nnyonye anya siri ike, ebe ọ na-akwado nchọpụta ntụgharị na-abụghị inductive, oti mkpu na ọrụ ndị ọzọ, na-akwado ụdị iwu pulse dị iche iche, ọtụtụ ntọala dip.
-
Ọgụgụ isi 2 Axis Stepper moto Drive R42X2
A na-achọkarị akụrụngwa akpaaka ọtụtụ axis iji belata ohere ma chekwaa ọnụ ahịa ya.R42X2 bụ draịva pụrụ iche nke abụọ axis nke Rtelligent mepụtara n'ahịa ụlọ.
R42X2 nwere ike ịnya ụgbọ ala abụọ 2-phase stepper n'onwe ya ruo nha etiti 42mm. A ga-edozirịrị obere nzọụkwụ nke axis abụọ na nke ugbu a ka ọ bụrụ otu.
• Ọnọdụ njikwa peed: mgbama ngbanwe ENA na-ejikwa mmalite-nkwụsị, na potentiometer na-achịkwa ọsọ.
• Ọkwa mgbaàmà: Ejikọrọ akara IO na 24V na mpụga
• Ike ọkọnọ: 18-50VDC
• Ngwa ndị a na-ahụkarị: akụrụngwa ebufe, ebuga nyocha, ihe na-ebu PCB
-
Ọgụgụ isi 2 Axis Stepper Drive R60X2
A na-achọkarị akụrụngwa akpaaka ọtụtụ axis iji belata ohere ma chekwaa ọnụ ahịa ya. R60X2 bụ draịva pụrụ iche nwere axis abụọ nke Rtelligent mepụtara n'ahịa ụlọ.
R60X2 nwere ike ịnya ụgbọ ala abụọ 2-phase stepper nke nwere onwe ya ruo nha etiti 60mm. Enwere ike ịtọ obere nzọụkwụ abụọ axis na nke ugbu a iche iche.
• Ụdị usu: PUL&DIR
• Ọkwa mgbaàmà: 24V ndabara, R60X2-5V chọrọ maka 5V.
Ngwa a na-ahụkarị: ihe na-ekesa, igwe na-ere ere, akụrụngwa nnwale ọtụtụ axis.
-
3 Axis Digital Stepper mbanye R60X3
Ngwa ikpo okwu atọ-axis na-enwekarị mkpa iji belata ohere ma chekwaa ego. R60X3/3R60X3 bụ mbụ atọ-axis pụrụ iche mbanye nke Rtelligent mepụtara na ụlọ ahịa.
R60X3 / 3R60X3 nwere ike ịnya ụgbọ ala atọ 2-phase / 3-phase stepper motors ruo nha etiti 60mm. Ihe nrịbama nke axis atọ na nke ugbu a bụ nke a na-edozi onwe ya.
• Ụdị usu: PUL&DIR
• Ọkwa mgbaàmà: 3.3-24V dakọtara; nguzogide serial achọghị maka ngwa nke PLC.
Ngwa a na-ahụkarị: ihe nkesa, ire ere
• igwe, ihe osise, multi-axis ule akụrụngwa.
